Hello lovelies,

 the Kochkulturmuseum (Food culture museum? 1:1 translation, no idea if it makes sense) announced a new Victorian Tea-time event. And Pi, Hias and I decided to even though it was somewhere in lower Austria. Usually for events like this we stick to Vienna but we wanted to borrow my parent's car which would make the travel cheaper. In the end, we had to borrow a sixt car for five hours and had to pay 122€ plus gas. Ugh. We started travelling around 1.3pm as it took an hour and the event started at 3pm.

It was foggy af, actually it has been foggy since in the beginning of December. We arrived and still had an hour left so we fled into the nearest warm shop, which was a bakery and bought bread and christmas cookies. The doors were opened on time and we had took the lift to the second floor. There, we entered a super cute room which was decorated with the red plates I knew. 

We immediately got this tower of sandwiches at our table, cucumber sandwiches and relish with cheddar. Latter was definitely my favourite. 

Continuing with the food, we also got artichoke and mushroom pies which were really good. I am not a fan of artichoke but I liked it. The pie was moist and tasty, but definitely nothing I would want to do at home.

And here is the cucumber sandwich. We also got three different kinds of teas - one white and two black but since I am also not a fan of white tea, I really enjoyed the other two.

 After stuffing my face with sandwiches, I went over to the sweet treats. The scones had no clotted cream but raisins in the dough so this was the only one I ate. Definitely not a fan of raisins.

 We also had a plate of gingerbead and buttery shortcake, and then plum pudding, which was lit on fire with enough alcohol to probably set the whole room aflame. Afterwards, we got a mug of wassail, a hot mulled punch. My sister and I were more fond of the non-alcohol version of it.

And, of course, a picture with a wonderful filter giving the room it's pastel colours back. I am wearing my baby the stars shine bright dress called Flower Garrett Juliet Onepiece, long version.

 I have been to two different Tea parties now and have to say that the ambience was great at both places, as was the food but the quantity of food was much greater at this party. What I liked more last time was that they set your Christmas pudding aflame on your table, that didn't happen this time. They set it aflame on another table and dimmed the lights. It would have been even better if they did this at every table.

All in all though it was a wonderful afternoon with plentiful of good food. Hias was so amazed that he asked that we go to the next event too. That was great as he had showed no interest in 2023 when I asked him to join us for the first Victorian tea party. 

If you enjoy this blog and want to support it, consider leaving a small donation via PayPal. Every bit helps keep things running and lets me keep creating more content just for you. You can donate by clicking the link below:

Thank you so much! 

All the best, 

Auris Lothol

Hello lovelies,

sorry for the lack of updates, I am currently super stressed because of exams, work and pretty much everything else. It's hell at the moment. I even took a vacation from work to study for my exams next week and there is still so much to study. And I just really want to sleep. Oh no. 

The title of the post is actually the whole story of this post. haha.

I entered an online giveaway from Veinityfair and won! I was over the moon when they contacted me for a comic. We talked about some ideas and I really loved the Victorian hair-jewellery. The artist went for it and about a month later, the comic was ready. 

I will only post two pages of it as a teaser. Read the whole comic on their Instagram.

Thank you so much again, that was great!

All the best,

Auris Lothol

Hello lovelies,

during the last sale from Black Snail patterns, I bought myself the e-pattern of a romantic era bonnet. Usually I really can't manage to do my own pattern for hats and bonnets. I have tried to sew my own romantic era bonnet but failed miserably.
I printed the pattern at work and glued the sides together at home, then cut out the pieces I needed.

The fabrics I used were pink satin, white felt, white cotton and buckram.


The first few steps were clear to me and I followed them with a bit of artistic freedom. It was pretty much just cutting out everything as the pattern stated and then sew them together. I started with the buckram base and afterwards added all the fabrics on top.

The pattern clearly stated to use reeds for that but I didn't have some yet and went ahead with hat wire. 


I use thick thread for sewing with buckram as it is much sturdier and not as easy to rip as the thin cotton threads used for sewing.
My stitches looked super uneven but as it was just the base for the hat I wanted to finished them quickly withouth much rafiness. 

The base was done over the span of two days and was a fun project. The not-so funny part would follow with the felt and satin layers. 


I pinned the felt onto the brim but it was too thick because after pinning them to the brim it just collapsed. It was then I found out, that the brim also needed reed to stiffen it.
Due to the corona outbreak I had to wait until the shop around the corner, which sells reeds, opened up again. I bought the 2,5mm reed and it worked perfectly, I would not have thought that the brim would have such a good support with just one row of the reeds.



I pinned the felt onto the hat a second time and it worked so much better with the reeds. But then the next problem arose, was the hat too thick with a felt on both sides? I thought it did.



I wore the bonnet during different stages of the process and although the form was alright in this pictures, it is clearly visible that the felt hangs from the hat, but not in a good way. Maybe I should have glued the felt directly onto the hat. But I didn't. Big mistake.



But how to attach the outer material? I was not fond of the ribbon method used in the instruction, as my fabric was super flimsy and fraid so easily. Ugh. At first I really tried to follow the instructions but it just didn't work. Afterwards I just did whatever I thought was ok.

This was how the instructions said this should look like. The top would have been bound with a ribbon but I didn't like it. And there was no way I could do a nice looking ribbon with my fabric.
Therefore I cut all the satin pink outer pieces again and added a seam allowance of 2cm. I cut into the fabric and sewed it onto the felt. In hindsight I should have cut away the excess of the seam allowance as it was visible.

 The hat part was folded over the round top part and the brim was folded onto the hat part. It did work but doesn't feel right.


 Now that the outer fabric is fixed, how to insert the innter fabric? I tried different ways but the best way for me was to sew a running stitch over the outer part of the brim and pulled. The outer part would have then closed over the inside and would have made it easier to sew.



I didn't like the raw inside and decided I had to cover it up too. But without felt, just with the satin and cotton fabric. No idea why the pattern failed me but I had a lot left of the side hat parts and just folded them inside. I had run out of patience and just wanted to finish the hat as soon as possible. 



But what about the back part? I had cut too much and there was no way I could fix it.
I sewed on a row of frills but it still did not hide much.



And the hat was done. Finally. I just covered up the bad part with a ribbon and it didn't look too bad.
The only part that I am definitely unhappy with is the weird sagging of the front brim.

 


What do you think? Weird sagging brim or just my imagination?

All the best,

Auris Lothol

Hello lovelies.

last weekend was a historical event in Vienna organized by the military history museum.
I like to go there a lot because it is one of the few historical events in Vienna and it also has a nice programme.
The last weeks were spent sewing a medieval costume until I run out of fabric. Then I tried to fix up the red burgundian dress but I didn't manage to finish that either. In the end I decided to wear my Biedermeier 1830s dress. It was finished completely. Then the day of the event I decided to do a bonnet. It took me about three hours and a lot of nerves because a friend was already waiting impatiently. Sorry again.

For the hat I used a real straw hat I bought a few years ago, the inner lining is out of thin satin chiffon and I also added a lace trim, roses and a bird. But you can use any material accurate of that time if you want to do it historicaly accurate, and if not, you have even more material to choose from.

I the cut a round shape into the hat. It looked okay at the time but I would recommend making it bigger because the sides of the straw always scratched my neck.


The hat is a bit browner because I used steam to give the sides a new form. If you don't have a steamer you can also use the steam of your iron. Just don't burn yourself. Also if you want to do anything with straw, better keep some water ready in a spray bottle because the straw is much more flexible once its wet.


After it was attached on the outer side of the brim I cut it, afterwards I added some lace to it and sewed it on again. That took the longest time and I also scratched myself a few times with the needles poking out of the brim.



I then added a yellow satin ribbon, some red flowers and a bird (which was already detached when I did the pictures) and I was done.



For the next time I will add more decoration but for now that was all I had.

Here are a few pictures of the event.



How do you like it?

All the best,

Auris Lothol